1 silicon double balanced hmic mixer 1700 - 2200 mhz m/a-com products rev. v3 ma4exp190h1-1277t advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. features ? + 33 dbm typical input ip3 ? 8. 3 db typical conversion loss ? + 17 to + 19 dbm lo drive ? fully balanced passive mixer ? no external matching required ? low cost miniature plastic mlp package ? rohs* compliant with 260 c. reflow capability ? 100% matte tin plating description and applications m/a-com's ma4exp190h1- 1277t is a silicon monolithic 1700-2200 mhz, high barrier, double balanced mixer in a low cost, miniature surface mount fqfp-n 3mm square, 16 lead plastic package. the die uses m/a-com?s unique hmic silicon/glass process to r ealize low loss passive elements while retaining the advantages of high barrier silicon schottky barrier diodes to produce a compact device. these mixers are well suited for gsm, dcs, pcs, cdma and umts base stati on applications where small size and high performance are required. typical applications include frequency conversion, modulation, and demodulation in wireless receivers and transmitters. mlp 3mm package (circuit side view) absolute maximum ratings 1,2 parameter maximum ratings operating temperature -40 c to +85 c storage temperature -65 c to +150 c incident lo power +20 dbm c.w. incident rf power +20 dbm c.w. soldering temperature +260 c 1. exceeding these limits may cause permanent damage. 2. please refer to applicati on note m538 for surface mounting instructions. pin configuration mixer schematic pin 1 pin 16 pin function pin function 1 n/c 9 n/c 2 n/c 10 rf 3 lo 11 n/c 4 n/c 12 n/c 5 n/c 13 n/c 6 n/c 14 if 7 n/c 15 n/c 8 n/c 16 n/c ordering information part number package ma4exp190h1-1277t tape and reel mamx-090190-000smb sample test board lo if rf * restrictions on hazardous substanc es, european union directive 2002/95/ec.
2 silicon double balanced hmic mixer 1700 - 2200 mhz m/a-com products rev. v3 ma4exp190h1-1277t advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. electrical specificat ions @ +25 c parameter frequency range test conditions units min. avg. max. conversion loss 1925 mhz 1700-2200 mhz lo drive = +19 dbm rf = -10 dbm, if = 60 mhz db - - 8.3 8.4 9.5 9.5 l - r isolation 1925 mhz 1700-2200 mhz lo drive = +17 dbm rf level = -10 dbm db - - 48.0 48.0 - - l - i isolation 1925 mhz 1700-2200 mhz lo drive = +17 dbm rf level = -10 dbmm db - - 46.0 44.0 - - r - i isolation 1925 mhz 1700-2200 mhz lo drive = +17 dbm rf level = -10 dbm db - - 25.0 25.0 - - rf vswr 1925 mhz 1700-2200 mhz lo drive = +17 dbm rf level = -10 dbm ratio - - 1.1:1 1.3:1 - - if vswr dc - 500 mhz lo drive = +17 dbm rf level = -10 dbm ratio - - 1.6:1 - - input ip3 2025 mhz 1700-2200 mhz lo drive = +19 dbm rf = -10 dbm, if = 60 mhz dbm - - 34.0 32.0 - - input 1 db compression 1925 mhz 1700-2200 mhz lo drive = +17 dbm if = 60 mhz dbm - - 11.3 11.2 - - if1 db bandwidth dc-400 mhz lo = 1850 mhz @ +17dbm mhz 0 - 400
3 silicon double balanced hmic mixer 1700 - 2200 mhz m/a-com products rev. v3 ma4exp190h1-1277t advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. typical performance curves (lo drive = +17 dbm, rf = -10 dbm, if = 60 mhz) isolation conversion loss -12.0 -11.0 -10.0 -9.0 -8.0 -7.0 -6.0 -5.0 1750 1775 1800 1825 1850 1875 1900 1925 1950 1975 2000 2025 2050 2075 2100 2125 2150 frequency ( mhz ) conversion loss ( db ) plo=17dbm plo=19dbm -60 -50 -40 -30 -20 -10 0 1700 1750 1800 1850 1900 1950 2000 2050 2100 frequency (mhz) isolation (db) (iso r - i) (iso l - i) (iso l - r) plo = 17 dbm plo = 19 dbm ( iso r - i ) ( iso l - i ) ( iso l - r )
4 silicon double balanced hmic mixer 1700 - 2200 mhz m/a-com products rev. v3 ma4exp190h1-1277t advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. typical performance curves (lo drive = +17 dbm, rf = -10 dbm, if = 60 mhz) i nput ip3 & 1db compression power rf & if vswr 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1700 1725 1750 1775 1800 1825 1850 1875 1900 1925 1950 1975 2000 2025 2050 2075 2100 2125 2150 10 60 110 160 210 260 310 360 410 460 510 560 610 660 710 760 810 860 500 frequency (mhz) vswr ratio i -port r -port 5 10 15 20 25 30 35 40 1900 1950 2000 2050 2100 2150 frequency (mhz) ip3 & p1db (dbm) plo=19dbm plo=17dbm 1db compplo=17dbm if=60 mhz i - port r - port plo = 19 dbm plo = 17 dbm 1 db compplo = 17 dbm
5 silicon double balanced hmic mixer 1700 - 2200 mhz m/a-com products rev. v3 ma4exp190h1-1277t advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. typical performance curves (lo drive = +19 dbm, rf = -10 dbm, if = 60 mhz) input ip3 5 10 15 20 25 30 35 1700 1750 1800 1850 1900 1950 frequency (mhz) input ip3 ( dbm ) plo=19dbm if = 200 mhz
6 silicon double balanced hmic mixer 1700 - 2200 mhz m/a-com products rev. v3 ma4exp190h1-1277t advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ma4exp190h1-1277t outline - 3mm fqfp-n 16 lead saw singulated
|
